Aquachlor-30

AQUACHLOR consists of two units:

electrochemical unit (weight – 15 kg, dimensions – 25x43x97 cm);
brine preparation unit (weight – 25 kg, dimensions – 43x85x120 cm);
Total weight of supply set: 40 kg.

Connecting:

to pressure water line with water temperature from +2 to +35°С under pressure from 2 to 6 bar;
to electric power of 220 V and 50 Hz (110 V, 50/60 Hz);
to brine tank equal to daily consumption (not less than 10 l) by way of flexible tubing 10 meters in length, at that maximal size of brine tank is not limited;
to catholyte collecting tank equal to daily production of catholyte by AQ-30 (not less than 10 l).

Supply set:

device consisting of electrochemical unit, brine preparation unit fixed on a platform equipped with brine preparation tank (40 l);
oxidants collecting tank (60 L);
5% hydrochloric acid tank (10 L);
connecting tubing;
reducer;
valves.

Characteristics

Basic product
Overall dimensions (width×length×height), mm	275 × 300 × 970
Maximum power consumption, Wt	180
Nominal power consumption, Wt	60
Salt concentration in the initial solution, g/l	200 - 250
Salt conversion rate, %	98,0 - 99,5
Weight, kg	15
Production of gaseous mixed oxidants, g/h	30
Production of aqueous solution of mixed oxidants, l/h *	30
Concentration of aqueous solution of mixed oxidants , mg/l	900 - 1000
Hydrogen ion exponent, рН	2,0 - 3,5
Specific sodium chloride consumption for synthesis of 1g of mixed oxidants, g/g	not exceeding 2,0
Specific power consumption for synthesis of 1g of mixed oxidants, Wt/g	1,8 - 3,5
By-product
Catholyte concentration (aqueous solution of sodium hydroxide NaOH), g/l	150 - 170
Production of catholyte, l/h	0,2 – 0,3
Production of gaseous hydrogen, g/h**	1

* - controllable variation of hourly consumption of oxidants solution is possible by way of respective variation of it’s concentration, controllable variation of oxidants is possible by way of current strength adjustment.

** - taken outside the room through flexible tubing or dispersed in the air, represents no danger.

size