Aquachlor-100

AQUACHLOR consists of two units:

electrochemical unit (weight – 20 kg, dimensions – 25x43x125 cm);
brine preparation unit (weight – 25 kg, dimensions – 43x85x120 cm);
Total weight of supply set: 50 kg.

Connecting:

to pressure water line with water temperature from +2 to +35?С under pressure from 2 to 6 bar;
to electric power of 220 V and 50 Hz (110 V, 50/60 Hz);
to brine tank of 40 L in volume by way of flexible tubing;
to catholyte collecting tank equal to daily production of catholyte by AQ-100 (not less than 30 L).

Supply set:

device consisting of electrochemical unit, brine preparation unit fixed on a platform equipped with brine preparation tank (40 L);
oxidants collecting tank (60 L);
5% hydrochloric acid tank (10 L);
connecting tubing;
reducer;
valves.

Characteristics

Basic product
Overall dimensions (width×length×height), mm	275 × 300 × 1250
Maximum power consumption, Wt	600
Nominal power consumption, Wt	200
Salt concentration in the initial solution, g/l	200 - 250
Salt conversion rate,%	98,0 - 99,5
Weight, kg	25
Production of gaseous mixed oxidants, g/h	100
Production of aqueous solution of mixed oxidants, l/h *	100
Concentration of aqueous solution of mixed oxidants , mg/l	900 - 1000
Hydrogen ion exponent, рН	2,0 - 3,5
Specific sodium chloride consumption for synthesis of 1g of mixed oxidants, g/g	not exceeding 2,0
Specific power consumption for synthesis of 1g of mixed oxidants, Wt/g	1,8 - 3,5
By-product
Catholyte concentration (aqueous solution of sodium hydroxide NaOH), g/l	150 - 170
Production of catholyte, l/h	1,0 – 1,2
Production of gaseous hydrogen, g/h**	3,0

* - controllable variation of hourly consumption of oxidants solution is possible by way of respective variation of it’s concentration, controllable variation of oxidants is possible by way of current strength adjustment.

** - taken outside the room through flexible tubing or dispersed in the air, represents no danger.